Easily lift heavy materials with high suction vacuum technology
1. Uses a high suction pump and strong seals to prevent loss of vacuum pressure while working.
2. Withstands up to 440 pounds of pressure without losing pressure, allowing for faster work without sacrificing precision.
3. It’s very simple to use. Simply place the tool on any flat material and press the green button.
4. Will monitor vacuum pressure during motion and even automatically restore pressure.
Lifting capacity：
 |
Perpendicular Hold
|
Parallel Hold
|
| Glass | 440 pounds (200 kg) | 286 pounds (130kg) |
| Ceramic tile | 440 pounds (200 kg) | 286 pounds (130kg) |
| Metal | 440 pounds (200 kg) | 265 pounds (120 kg) |
| Plastic | 440 pounds (200 kg) | 265 pounds (120 kg) |
| Wood | 242 pounds (110 kg) | 155 pounds (70 kg) |
| Rough Slate | 187 pounds (85 kg) | 187 pounds (85 kg) |
| Rough Concrete | 187 pounds (85 kg) | 187 pounds (85 kg) |
| Drywall | 176pounds (80 kg) | 155 pounds (70 kg) |
Features a built-in automatic on/off sensor that turns the motor off when full vacuum is reached and back on if suction is lost.
Advanced vacuum pump and strong foam rubber seals make it resistant to loss of pressure.
Activating the electric pressure pump creates a vacuum strong enough to lift up to 375 pounds.
Attaches product to any non-porous flat surface to easily handle heavy, bulky and bulky materials.
Lifts any compatible material in seconds with the push of a button. Monitors your vacuum pressure and automatically activates if vacuum pressure is lost.
Specifications:
| Model/SKU | GED-DX51 Smart Suction Cup |
| Battery | 21VDC 2000mAh Li-ion |
| Rated Power | 20W |
| Charger Input Voltage | 100-240VAC 50/60Hz |
| Battery Charging Time | ~2hours |
| Non-Stop Running Time(FullCharge) | 1.5hours |
| Running Cycles(On FullCharge) | 900 ON-OFF cycles of 10 seconds |
| Stand-by Mode(Charge Hold) | 30 days |
| Pump Service Life | 100000+ON-OFF cycles/800+hrscontinuous |
| Rated Air Flow | 0.7cfm(20 L/min) |
| Maximum Vacuum Rate | 11.6Psi(0.8 Bar,80 kPa) |
| Maximum Lifting Capacity | 440pounds(200 kg) |
| LxWxH | 11.77×7.22×4.76″(300x184x121 mm) |
| Net Weight (With Battery) | 3.2pounds(1.5 kg) |
| Working Temperature | 32F~140F(0°~60℃) |
| Applicable Surface Type | Peak/valley heights less than 0.1″(3mm), arc less than5° |
| Additional Features | Pump stops automatically at maximum vacuum rate(11.6Psi/0.8 Bar) |
